Alignment Accessories
Alignment Supplies, Inc. also offers a full range of alignment-related products like shims, bearing heaters and undercut bolts. Take a look at some of our products below!
Shaft Alignment Training Simulator
Shims
Bearing Heaters
Undercut Bolts
Run Out Kit with Micrometer
Side Align
Shaft Alignment Training Simulator
Train your technicians in a controlled environment!
Proper training can be the difference between a successful alignment and a splitting headache. Alignment Supplies, Inc. is proud to offer our Shaft Alignment Training Simulator for both laser and dial indicator methods of alignment. Our clean and functional design allows you to make both horizontal and vertical adjustments without the use of any hand tools or shims.
- Aluminum construction
- Anodized finish
- Shaft rotational locking break
- Vertical adjustment knobs
- Horizontal adjustment knobs (jack bolts)
- Both the stationary or moveable units can be aligned or shimmed.
- Polished shaft
- Flexible coupling
- Shims or vertical adjustment knobs can be used
- Under body rubber feet to protect against scratching fine finish surfaces.
- No tools required
Specifications:
Part Number 10-0124
Weight: 33 lbs.
Height: 11.5"
Length 25"
Width: 10"
Price: $1,850.00
Call us at 419.887.5890 for more information or to order your Simulator today!
Back To TopShims
Pre-cut, ready to use, and marked with the ACTUAL thickness to save you alignment time!
It costs you far more to hand cut shims than to use our pre-cut stainless steel shims. There's no cutting, deburring, or wasted material. "Soft Foot" is also eliminated as fewer shims are required to obtain a desired thickness. A more precise alignment is the result! Call us at 419.887.5890 for pricing or to place your order!
Pre-Cut Stainless Steel Shims are available in:
Full Sets (20 shims of each thickness)
Mini Sets (10 shims of each thickness)
Replacement Packs (20 shims of the thickness selected)
|
SIZE A |
SIZE B |
SIZE C |
SIZE D |
|
Shim Thicknesses |
||||||
| Thickness | Full Set | Mini Set | ||||
| .001" | 20 | 10 | ||||
| .002" | 20 | 10 | ||||
| .003" | 20 | 10 | ||||
| .004" | 20 | 10 | ||||
| .005" | 20 | 10 | ||||
| .010" | 20 | 10 | ||||
| .015" | 20 | 10 | ||||
| .020" | 20 | 10 | ||||
| .025" | 20 | 10 | ||||
| .050" | 20 | 10 | ||||
| .075" | 20 | 10 | ||||
| .100" | 20 | 10 | ||||
| .125" | 20 | 10 | ||||
| No. of Shims/Set |
260 | 130 | ||||
Metric and Custom Shims Available
For Metric Shims: Call us at 419.887.5890 for more information.
For Custom Shims: Call or fax your drawings for a quote and delivery time. FAX: 419.887.5893
Bearing Heaters
Fast and safe controlled heating systems for bearings and couplings!
Alignment Supplies, Inc. is proud to offer TM Induction Heating's line of Easy therm induction heaters. TM has manufactured induction heaters for more than 25 years and their expertise and innovation are well-known throughout the industry. We offer a full line of induction heaters for all kinds of induction applications!
Click here to learn more about our Bearing Heaters!
Undercut Bolts
Virtually Eliminates
the Problem of Bolt Binding!
|
Undercut bolt sets consist of hardened grade 8 bolts which are precisely machined to provide maximum clearance in the mounting foot of motors and gearboxes. Included in the sets are hardened, plated washers which offer superior strength and durability.
If the standard sets do not fit your specific requirement, we can provide a custom set for your needs from a large selection of bolts and washers. |
Call us for pricing and available sizes: 419.887.5890
Run Out Kit with Micrometer
Take control of Soft Foot and Run Out problems!
Dial Indicator Kit with micrometer to check for "Soft Foot" and shaft/coupling "run out".
Always mic your precut shims to prevent "stacking" tolerances. Most shim manufacturers do not put the "actual" thickness stamp on the shim, only the professed thickness.
Check for shaft and coupling run out before you take your laser or dial readings. Bent shaft and out of round couplings could cause problems.
Check for "Soft foot" as well, position the dial over the foot and loosen the bolts one at a time. Your motor must rest on a "flat" plane before you start to precision align.
Call us at 419.887.5890 for more information or to order your Run Out Kit today!
Side Align
Side to Side Motor Adjustment has never been easier!
| Set No. AT-1104 (14 pieces)  |
Set No. AT-1108 (28 pieces)  |
|
Includes: Eccentric socket ES-1 thru ES-4. |
Includes: Eccentric socket ES-1 thru ES-8. |
Easy To Operate - Unscrew securing bolt 1 turn, fit alignment tool as shown.
Simply rotate the eccentric actuator to perform a controlled, precise move.
Works with any alignment equipment or method you may now be using to give you faster, more precise results.
|
SPECIFICATION CHART |
||||||||
| ECCENTRIC SOCKET SIZES | MOTOR APPLICATION RANGE | |||||||
| MODEL # | CONT. OF SET | SOCKET SIZE | STUD HOLE SIZE | WRENCH SIZE | AC MOTOR | DC MOTOR | BOLT SIZE | |
| HP RANGE | FRAME | FRAME | ||||||
| ES-1 | 2 | 9/16" | 3/8" | 5/8" | 2-30 | 182-286TS | 182A-288A | 3/8"-1/2" |
| ES-2 | 2 | 3/4" | 9/16" | 7/8" | ||||
| ES-3 | 2 | 15/16" | 5/8" | 1-1/4" | 20-300 | 342T-449TS | 323A-368A | 5/8"-3/4" |
| ES-4 | 2 | 1-1/8" | 3/4" | 1-1/4" | ||||
| ES-5 | 2 | 1-5/16" | 7/8" | 1-5/8" | 300+ | 5040-505S | 403A-448A | 7/8"-1" |
| ES-6 | 2 | 1-1/2" | 1" | 1-5/8" | ||||
| ES-7 | 2 | 1-11/16" | 1-1/8" | 2" | 300+ | 400M-8211S | 503A-688A | 1-1/8"-1-1/4" |
| ES-8 | 2 | 1-7/8" | 1-1/4" | 2" | ||||
| ALIGNMENT TOOL RANGE | |||||
| MODEL # | ALIGNMENT TOOL | CONTENTS | ACTUATOR SOCKET REQ. | TOOL RANGE | |
| MIN | MAX | ||||
| ATN-1 |  |
2 | ES-1 | 13/16" | 1-5/8" |
| ATN-2 | 2 | ES-2 | 7/8" | 2" | |
| ATN-3 | 2 | ES-3; ES-4 | 7/8" | 2-5/8" | |
| ATN-4 | 2 | ES-5; ES-6 | 1-1/2" | 4-1/2" | |
| ATN-5 | 2 | ES-7; ES-8 | 1-7/8" | 6-1/8" | |
Call us at 419.887.5890 with any questions or to order your Side Align today!