laser alignment measurements - For precision laser measuring for alignments, call Toledo Ohio's Alignment supplies.

D525

D525

Shaft Alignment + Vibration Measurement + Geometric Measurement

Display unit made of anodized aluminum.
Clear, backlit LCD display. Easy to read even in bad light conditions.
Universal shaft brackets with chains.
Distinct spirit levels in both units for quick and accurate positioning.
Double rods for each unit, made of stainless steel.
Cables with Push/Pull connection.
Small, lightweight measuring units made of aluminum.
All settings are available, as for our more expensive systems.
Durable membrane keyboard with all characters.
RS 232 port for printer and PC connection.
Battery operated display unit. Long operating time.

The measurement results
Offset and angular misalignment values are shown on the display, now you know if you are within the recommended tolerance. Plus the shim and horizontal corrections are given at the same time. Choose between "live" horizontal or vertical and watch your moves in real time making it easy to position the machine. Send the measurement results to a portable printer or store the information for PC interface and reporting.

No black magic
Shaft alignment with Easy-Laser is no hocus-pocus. Even if the technique inside the shell is rather advanced, the principle of measurement is easy. It is based on the reverse indicator method.

Offset value.
Angular value.
Shim/Adjustment values. Live direction indicated by filled machine feet symbols.
Tolerance settings display. Select speed range (1 of 5).
Filled coupling symbols indicating that alignment is within tolerance.

EasyTurn shaft alignment
With the EasyTurn-program and system D525 it is possible to do a measurement even when you can't turn shafts to positions 9-12-3. With this program it's possible to measure with only 20° rotation between measurement points. Integrated in both units are electronic inclinometers which detect the angular position of the units. This makes it possible to start the measurement anywhere over 360° rotation.

All programs are standard

Not only shaft alignment
Easy-Laser is not only a shaft alignment system, but now includes a vibration level and bearing condition. With 21 standard measurement programs, you can measure virtually anything. Some of the measurements, for example flatness, parallelity, etc., require optional equipment.

	New Vibrometer - Shows vibration level in "mm/s" or "inch/s" and bearing condition value in "g".
	Horizontal 9-12-3 - For the alignment of horizontal machines by the 9-12-3 method.
	Soft Foot - With this program you check so that the machine is resting on all feet. Shows which foot should be corrected (if necessary)
	EasyTurn^TM - For the alignment of horizontal machines. Allows complete measurement with only 40" rotation of the shafts.
	Cardan - Shows the angular errors and adjustment value on cardan-shaft-coupled/center-offset machines. (Requires accessory fixtures.)
	Vertical - For measurement of vertical and flange mounted machines.
	Machine Train - For the alignment of two to ten machines in a row (nine couplings). The entire alignment can be followed live on the screen.
	RefLock^TM - Any pair of feet can be locked/set as a reference. This is a sub-function in the machine train program.
	Thermal Growth Compensation - Compensates for difference in thermal growth between machines. This is a sub-program in the machine train program.
	Offset and Angle - Shows center offset and angular error between two shafts, for example. Also suitable for dynamic measurements.
	Values - Shows live readings from S- and M-unit. Can be used for shaft alignment, straightness measurement and dynamic measurement. Up to four detectors can be connected in series and be zeroed individually.
	Straightness - For straightness measurement of (for example) machine foundations, shafts, bearing journals, machine tools, etc. Can handle up to 150 measuring points with two zero points.
	Flatness - Program to measure flatness/twist of (for example) machine foundations, machine tables, etc. Handles up to 300 measuring points with three zero points.
	Squareness - For measurement of squareness in machines and installations.
	Parallelism - For measurement of parallelism between rolls, machine ends, etc. Can handle up to 150 rolls/measurement objects. The baseline or any roll may be used as a reference. Every object can be individually named.
	Spindle Direction - For measurement of the pointing direction of machine spindles machine tool, drilling machines, etc.
	Center of Circle - Used for straightness measurement of bearing journals when the bore diameter varies. For example diesel engines, propeller shaft installations, ect.
	Half-Circle - Readings are taken at three positions, for example 9, 6, and 3. Allows varying bore diameters. To be used together with the Turbine system.
	Plumb Line - With this program you measure plumb (vertical) and straightness of turbine and generator shafts, for example.
	Flange - For flatness measurement of flanges and circular planes, slewing ring bearings for example. Can handle up to 150 measuring points. Three zero points at 120° pitch are computed by the system.
	BTA Digital - For alignment of belt and chain drives. (Requires accessories BTA Digital transmitter and detector unit.)

Upgradeability

The Easy-Laser systems are designed to grow as the needs increase. If you add the swiveling laser D22 you can measure straightness, flatness, parallelism, squareness, horizontal plane and plumbline.

With a 2-axis detector you get both horizontal and vertical measurement values at the same time. This is useful for example when measuring vertical and horizontal straightness at the same time. These are examples of how you can use the upgradeability in our systems.

If you want to know more, contact Alignment Supplies for further information.

Download brochure in PDF format
D525 Shaft Alignment