Measurement Programs

Get Exactly What You Need!

The key to precision alignment is your ability to apply a practical approach to your measurement application. All measurement programs in the Easy-Laser^® systems guide the user through the process with graphics, text and a easy to follow procedure.

There are four program configurations for the Easy-Laser^® systems:

D450 includes 5 programs (Column A)

D550 includes 13 programs (Column B)

D480 & D505 includes 14 programs (Column C)

D525, D600, D630, D640, D650, D660, D670 & D800 include 27 programs (Column D)

(Note: E-Series systems not listed)

Program		Program description                      Column:	A	B	C	D
	Horizontal 9-12-3	For shaft alignment of horizontally mounted machines (requires 180° of shaft rotation)	√	√	√	√
	Soft Foot	With this program you can evaluate and correct the "flat plane" that is created by the machine feet.	√	√	√	√
	Thermal Growth Compensation	Offset and Angular targets can be entered to compensate for thermal expansion.	√	√	√	√
	Tolerance Table	Enter the machine speed (rpm) for the allowable misalignment values for offset and angle.	√	√	√	√
	Measurement Value Filter	Advanced electronic filter function for a reliable measurement result in a poor measurement environment, e.g. where there are air turbulence or machine vibrations.	√	√	√	√
	EasyTurn™	Requires only 40° of shaft rotation.		√	√	√
	Cardan	Shows angular errors and adjustment values on offset mounted machines. (Requires additional fixture kit)		√	√	√
	Vertical	For measurement of vertical flange-mounted machines.		√	√	√
	Machine Train	For the alignment of up to ten machines (nine couplings). Displays the results in a live graphical mode with optimal move software.		√	√	√
	RefLock™	Any pair of feet can be locked/set as a reference. This is a sub-function in the Machine Train program.		√	√	√
	Offset and Angle	Shows the offset and angular error between two shafts by taking only (1) tape rule measurement. Can be useful for dynamic measurement.		√	√	√
	Values	Shows live readings from the TDS and TDM units. Can be used for shaft alignment, straightness and dynamic measurement. Up to four detectors can be connected in series and zeroed individually.		√	√	√
	Vibrometer	Shows the vibration level in "inch/sec" or "mm/s" and bearing condition value in "g". Complies with vibration standard ISO10816-3. (Requires optional Vibrometer probe)			√	√
	BTA Digital	For digital alignment of belt and chain drives. Requires optional D160 detector & transmitter for documentation and corrections.			√	√
	Straightness	For straightness measurement of machine bases, shafts, bearing journals, machine tools, etc. Can handle up to 150 measurement points with two zero points.		√		√
	Straightness Plus	Versatile program with advanced functions. Measurement points can be added, removed or re-measured at any point during the measurement process. The reference line can be offset as required.				√
	Flatness	Program to measure flatness/twist of machine bases, machine tables, etc. Can handle up to 300 measurement points with three zero points.				√
	Squareness	For measurement of squareness in machines and installations.				√
	Parallelism	For measurement of parallelism between rolls, machine ends, etc. Can handle up to 150 rolls/measurement objects. The base line or any roll may be used as a reference. Every object can be individually named.				√
	Parallelism Plus	Versatile program with advanced functions. Measurement objects can be added, removed or re-measured at any point during the measurement process. Includes base line measurement function.				√
	Spindle Direction	For measurement of the pointing direction of machine spindles in machine tools, drilling machines, etc.				√
	Centre of Circle	Used for straightness measurement of bearing journals when the bore diameter varies. For diesel engines, propeller shaft installations, etc.				√
	Centre of Circle Plus	Versatile program with advanced functions. Measurement points can be added, removed or re-measured at any point during the measurement process. The reference line can be offset as required.				√
	Half-Circle	Readings taken in three positions: 9, 6 and 3 o'clock. Allows varying diameters as in turbine diaphgram measurement.				√
	Half-Circle Plus	Versatile program with advanced functions. Measurement points can be added, removed or re-measured at any point during the measurement process. The reference line can be offset as required.				√
	Plumb Line	With this program you can measure plumb (vertical) and straightness of turbine and generator shafts, for example.				√
	Flange	For flatness measurement of tower flanges and circular planes:  Can handle up to 300 measurement points and multiple circles on a flange for "lay-back". Three zero points at 120° apart are computed by the system.				√